Wooddryer System steam heat units are fabricated for maximum output and using all non-ferrous metal: Stainless steel for the casing and the tubing together with aluminum fins for maximum heat transfer to the air. The heat units comes in two sizes for both smaller and larger kilns. Using heat units instead of standard fin coils in a kiln improves main fan efficiency and air flow, by eliminating the resistance of the standard fin coils.

Above photos show heat unit WSUS-44/2-SS-ST190HU

Performance date:      Heat output   Steam      Ambient        Air volume  
                          Kw/btu    Pressure  Temperature     m3/hr / cfm  

WSUS-32/2-SS-ST95HU    142/487500    90 psi    27C/80F         8000 / 4150 
                       110/375000    90 psi    60C/140F    
                        95/325000    15 psi    27C/80F
                        63/212500    15 psi    60C/140F

WSUS-44/2-SS-ST190HU   285/975000    90 psi    27C/80F        16000 /  8300 
                       220/750000    90 psi    60C/140F 
                       190/650000    15 psi    27C/80F  
                       125/425000    15 psi    60C/140F




These heat unit are designed and manufactured to be
installed in corrosive and hostile environments, such
as lumber kilns. Both units has high air volume to
maximize the heat output of the coil area.

Please note that the small steam heat unit comes
complete with fan guard integrated into the motor
mount and can be installed below 2.1m or 7'. The
large unit does not come with fan guard and is to be
used in the top of a kiln or building.





Dimension:                 A          B         C         D      Flange
WSEU-32/2-SS-ST95HU      1120mm     840mm     330mm     250mm     51mm
WSEU-44/2-SS-ST190HU     1370mm    1140mm     495mm     250mm     38mm

WSUS-32/2-SS-ST95HU        44"       33"       13"       10"       2"
WSUS-44/2-SS-ST190HU       54"       45"       19.5"     10"      1.5"