Wooddryer System hot water heat units are fabricated for maximum output and using all non-ferrous metal: Stainless steel for the casing and copper tubing together with aluminum fins for maximum heat transfer to the air. The heat units comes in two sizes for both smaller and larger kilns. Using heat units instead of standard fin coils in a kiln improves main fan efficiency and air flow, by eliminating the resistance of the standard fin coils.

Above photos show heat unit WSUS-32/4-SS-HW130HU

Performance date:      Heat output     Water      Ambient        Air volume  
                          Kw/btu    Temperature  Temperature     m3/hr / cfm  

WSUS-32/2-CU-ST95HU    130/440000   90C/194F      27C/80F         8000 / 4150 
                        60/200000   90C/194F      60C/140F    

WSUS-44/2-CU-ST190HU   260/880000   90C/194F      27C/80F        16000 /  8300 
                       120/400000   90C/194F      60C/140F 
                       




These heat unit are designed and manufactured 
to be installed in corrosive and hostile
environments, such as lumber kilns. Both units
has high air volume to maximize the heat
output of the coil area.

Please note that the small steam heat unit
comes complete with fan guard integrated into
the motor mount and can be installed below
2.1m or 7'. The large unit does not come with
fan guard and is to be used in the top of a 
kiln or building.





Dimension:                 A          B         C         D      NPT thread
WSEU-32/4-CU-HW130HU     1120mm     840mm     330mm     250mm       51mm
WSEU-44/4-CU-HW260HU     1370mm    1140mm     495mm     250mm       38mm

WSUS-32/4-CU-HW130HU       44"       33"       13"       10"         2"
WSUS-44/4-CU-HW260HU       54"       45"       19.5"     10"        1.5"